Scope of work

Installation of a 60-amp 240V dedicated branch circuit to support a single receptacle for high-powered appliances using Rigid Metal Conduit (RMC) - Primarily to be used for high powered appliances such as drills welders and other machine tools. **Addition of Sub-Panel Adjacent to Main Panel. A sub-panel will be installed approximately 2 inches adjacent to the main panel. An additional 2-gang metallic box will be installed approximately 5 inches from the originally planned receptacle box location which is an indoor location. The two 2-gang boxes will be connected using approximately 6 inches of 1-inch non-metallic liquid-tight flexible conduit. Both boxes will be bonded to the equipment grounding conductor that was pulled as part of the main conduit run.

Record

Contractor

No contractor on file (often owner-permitted work).

This property

25 permits on record at this address.